ASTM A513 Mechanical Tubing

astm a513, ASTM A513 1010, ASTM A513 1020, ASTM A513 1026, ASTM A513 4130, mechanical tubing, Seamless tube, Tubing

ASTM A513-08 Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing.

ASTM A513-08 Standard specification covers round, square, rectangular, and special shape tubing. Optional supplementary requirements are provided and when desired, shall be so stated in the order.

Main grade:

• ASTM A513 1010

• ASTM A513 1020

• ASTM A513 1026

• ASTM A513 4130




Size range of round Electric-Resistance-Welded tubing:

Type(ERW)	Size Range (Round Tubing)
Hot-Rolled Steel	outside diameter from 1/2
	to 15 in. (19.0 to 381.0 mm)
	wall from 0.065 to 0.650 in.
	(1.65 to 16.50 mm)
Cold-Rolled Steel	outside diameter from 3/8to 12 in.
	(9.92 to 304.8 mm)
	wall from 0.022 to 0.134 in. (0.71
	to 3.40 mm)

The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

Grade and Chemical Composition(%) of ASTM A513:

Grade	C	Mn	P(max)	S(max)	Si	Cr	Mo
ASTM A513 1010	0.08-0.13	0.30-0.60	0.035	0.035	-	-	-
ASTM A513 1020	0.17-0.23	0.30-0.60	0.035	0.035	-	-	-
ASTM A513 1026	0.22-0.28	0.60-0.90	0.035	0.035	-	-	-
ASTM A513 4130	0.28-0.33	0.40-0.60	0.035	0.04	-	-	-

Mechanical Properties of ASTM A513:

Grade	Tensil strength(Mpa) ≥	Yield strength(Mpa) ≥	Elongation% ≥	RB, ≥
ASTM A513 1010	379	310	12	68
ASTM A513 1020	448	379	10	75
ASTM A513 1026	517	448	10	80
ASTM A513 4130	621	552	10	87




Usage:

Steel pipe are ubiquitous and can be found underground and within residential walls, laboratories, and commercial and industrial structures. Seamless steel pipe transport fluids including water, natural gas, waste and air. Three manufacturing methods exist to produce steel pipes.

Seamless steel pipes are produced using an extrusion mold. Welded steel pipes are produced by rolling a sheet of steel into a tube and welding the seam. Seamless steel pipes are less expensive. The third method is casting. Molten steel is poured into a casting mold.

Our steel pipes and tubes are the preferred choice for processes under the following conditions:

- high temperatures

- and/or high pressure


We have a team of experienced professionals with years of experience in manufacturing.




•